Major offshore wind manufacturing facility planned for Scottish Highlands
Plans for a major offshore wind manufacturing facility in the Scottish Highlands have taken a step forward following a project with the National Manufacturing Institute Scotland (NMIS) and the Offshore Wind Growth Partnership (OWGP).
Engineering company Slipform Engineering is proposing a new factory at Kishorn, known as Slip4Wind®, capable of producing up to 36 concrete floating offshore wind foundations a year. Together, these could support more than 500 MW of offshore wind capacity annually.
Each foundation would weigh approximately 20,000 tonnes, presenting an enormous manufacturing and logistical challenge. Slipform Engineering's solution is to keep the foundations in place while a specially designed gantry system moves the manufacturing equipment around them. Once complete, the structures could be transferred directly into the water, avoiding costly movement around the site.
The company is applying its expertise in slipforming, a technique that uses continuously moving moulds to construct large concrete structures.
Funded by the Offshore Wind Growth Partnership through its SmartStart Manufacturing Programme, the project brought Slipform Engineering together with NMIS to assess the proposed factory's production capacity, costs and workforce requirements ahead of major investment decisions.
NMIS engineers used computer modelling and discrete event simulation to explore how the factory could operate, including staffing levels and shift patterns. The work identified potential bottlenecks and opportunities to improve efficiency, including more flexible working arrangements and training employees to carry out different roles.
The team at NMIS also developed a phased plan covering infrastructure, investment, regulatory requirements and workforce development, providing evidence to support future discussions with investors and offshore wind developers.
Eamon Hanley, founder and managing director at Slipform Engineering, said: “Floating offshore wind presents a significant opportunity for UK manufacturing, but producing these foundations at the scale required means finding ways to make the process more efficient and commercially viable. Our plans for Slip4Wind® at Kishorn are designed to reduce some of the major costs associated with traditional manufacturing methods, particularly the need to transport these enormous structures around a site before they enter the water.
“Working with NMIS through OWGP’s SmartStart Manufacturing Programme has been extremely valuable in helping us test our plans before making that investment. The modelling has given us greater confidence in what we can achieve at Kishorn, while identifying practical improvements that we can incorporate into the factory’s development.”
Alongside its plans for Kishorn, Slipform Engineering is progressing work on its demonstration, research, development and training facility at Hunterston in North Ayrshire. Work is now well underway, with the facility scheduled to open in January 2027.
The site will allow the company to test a smaller version of its gantry system, trial different concrete materials and develop the skills needed to support future production at Kishorn.
NMIS has also connected the company with Ayrshire College to explore opportunities for workforce training and multi-skilling.
Pritty Mathew, design engineer at NMIS, said: “Manufacturing foundations of this size presents significant practical challenges. By simulating the production process before construction begins, we were able to assess whether Slipform Engineering's targets were achievable and identify opportunities to improve efficiency.
“The findings give the company a clearer understanding of what's needed to turn its plans for Kishorn into a working manufacturing facility.”
Slipform Engineering was one of four businesses selected for OWGP's SmartStart Manufacturing Programme, with specialist manufacturing support delivered by the High Value Manufacturing Catapult. The programme provides technical support to help UK manufacturers develop investment-ready proposals for the offshore wind market.
Teo van der Kammen, senior project manager at OWGP, added: “Slipform Engineering is a strong example of the type of manufacturing opportunity we set out to support through SmartStart. Strengthening the UK’s ability to manufacture major offshore wind components will be critical as the market expands, and the work undertaken by NMIS has helped bring the company’s ambitions for Kishorn and Hunterston closer to becoming a reality.”
NMIS is operated by the University of Strathclyde and is part of the High Value Manufacturing Catapult.
Latest news from across the NMIS Group
-
Major offshore wind manufacturing facility planned for Scottish Highlands
Monday, November 16, 2026 -
Manufacturing blueprint maps route to UK floating wind facility
Friday, October 2, 2026 -
New training partnership agreed for Inchgreen
Thursday, June 19, 2025 -
Glasgow circular economy firm helps pioneer digital product passport technology
Thursday, June 19, 2025 -
NMIS 5G trial explores future of industrial connectivity in Ayrshire
Thursday, June 19, 2025 -
Pioneering high-pressure cold spray transforms manufacturing of complex copper rocket nozzles
Tuesday, May 27, 2025 -
Greenock semiconductor plant boosts efficiency through smarter use of data
Friday, May 8, 2026 -
NMIS and Renewable Parts strengthen collaboration through senior engineering appointment
Thursday, April 16, 2026 -
Scottish-Irish Offshore Wind Internship launches
Wednesday, March 25, 2026 -
AI initiative gives 250 Scottish manufacturers a competitive edge
Monday, December 8, 2025 -
Robot dog sniffs out the future of whisky warehousing innovation
Friday, September 26, 2025 -
Rolls-Royce manufacturing leader Neil Mantle appointed to NMIS Board
Thursday, October 2, 2025 -
Maritime project delivers 10% emissions cut and 90% faster lead times using large scale additive manufacturing
Thursday, August 28, 2025 -
Apprentices plug into digital tools in manufacturing skills drive
Monday, July 14, 2025 -
Funding injection set to expand NMIS’s semiconductor manufacturing capabilities to create UK centre for advanced packaging
Wednesday, July 2, 2025 -
Advanced remanufacturing could transform wind turbine repairs and cut emissions
Wednesday, June 4, 2025 -
Harris Tweed® weaves next-generation technology into centuries-old craft
Thursday, May 29, 2025 -
Major inward investment secured with US manufacturer
Wednesday, May 21, 2025 -
Superplastic forming community to gather in Scotland for Euro SPF 2025
Monday, April 14, 2025 -
£9 million funding boost to bring key semiconductor manufacturing capability to Scotland
Thursday, March 20, 2025 -
NMIS joins space race with unveiling of second-stage vehicle demonstrator
-
New Digital Process Manufacturing Centre unlocks emerging technology for Scottish industry
Thursday, February 27, 2025 -
Plugging AI skills gaps critical for future of shipbuilding industry
Thursday, February 20, 2025 -
Construction begins on NMIS supported £9 million ETZ EnergyWorks in Aberdeen
Friday, November 22, 2024 -
New £5.5M manufacturing centre set to boost UK’s net-zero goals and drive economic growth
Wednesday, November 6, 2024 -
Startup aims to peel back plastic use with onion skin packaging
Wednesday, October 9, 2024 -
AFRC and ATI forge partnership to boost aerospace materials innovation
Wednesday, October 9, 2024 -
NMIS strengthens leadership team with two new appointments
Tuesday, September 17, 2024 -
3D printing helps young entrepreneur’s therapy device blossom
Thursday, September 5, 2024 -
AFRC achieves world-class accreditation for mechanical testing
Monday, August 5, 2024 -
Factory simulation helps Scottish confectioner hit the sweet spot
Monday, July 22, 2024 -
NMIS hires industry heavyweight as electrification lead
Monday, July 1, 2024 -
NMIS bolsters board with two industry powerhouses
Monday, June 17, 2024 -
£14 million funding to support Glasgow manufacturers to become greener and more productive
Wednesday, May 8, 2024 -
Hybrid approach to titanium manufacturing boosts UK aerospace opportunity
Thursday, April 18, 2024 -
Pioneering forging research hub puts Scotland at the forefront of advanced engineering
Thursday, March 21, 2024 -
Apprenticeship matchmaking tool aims to close Scotland’s manufacturing skills gap
Thursday, March 7, 2024 -
Scottish SMEs receive £1M support to explore additive manufacturing
Wednesday, February 7, 2024 -
Decking company elevated to new heights with ‘floating’ gardens
Tuesday, December 19, 2023 -
AFRC and ITP Aero win EPSRC Prosperity Partnership Award
Wednesday, November 29, 2023 -
Groundbreaking project to bring high-value 3D printing to UK manufacturing
Wednesday, August 9, 2023 -
Cutting-edge demos boost small business growth in the UK’s machining sector
Thursday, July 27, 2023 -
National Manufacturing Institute Scotland to help deliver Scotland’s first energy incubator and scale-up hub
Wednesday, July 12, 2023 -
Ground-breaking NMIS facility paving the way for the future of manufacturing in Scotland
Wednesday, June 21, 2023 -
Net-zero future for UK wind industry accelerating with growth of new industry body
Tuesday, June 13, 2023 -
Striking a hammer blow for metals recycling
Wednesday, May 3, 2023 -
Scotland’s manufacturing R&D anchor bolsters leadership team with new talent
Monday, March 6, 2023 -
The future’s looking green for Scotland’s manufacturers as the Lightweight Manufacturing Centre commissions new equipment
Thursday, February 16, 2023 -
Major milestone achieved at Scotland’s new flagship manufacturing R&D facility
Friday, February 10, 2023 -
Become a sustainability champion for free with the Manufacturing Skills Academy
Monday, December 19, 2022 -
New supply chain R&D project aims to revolutionise zero-emissions shipbuilding and create Scottish jobs
Thursday, December 1, 2022 -
Works begin at Ayrshire’s new manufacturing innovation centre
Thursday, November 24, 2022 -
Scotland’s innovation magnet attracts global tech firms as it opens its membership programme
Thursday, October 13, 2022 -
Five minutes with…Jennifer MacDonald
Tuesday, October 11, 2022 -
Five minutes with… Daniele Marini
Tuesday, October 11, 2022 -
Five minutes with… Anastasia Khatunsteva
Thursday, October 6, 2022 -
Research ties between Scotland and Australia could advance shipbuilding on the Clyde
Friday, September 23, 2022 -
National Manufacturing Institute Scotland appoints former UKRI Challenge Director as Chief Executive Officer
Monday, September 5, 2022 -
New course with key industry players to boost photonics skills
Thursday, August 18, 2022 -
Forging ahead
Wednesday, August 17, 2022 -
Orkney manufacturers given first access to national net-zero initiative
Tuesday, July 5, 2022 -
NMIS celebrating Scottish manufacturing with the FM’s award for manufacturing leadership
Thursday, June 16, 2022 -
Strathclyde, SSE Renewables & Renewable Parts sign joint MoU to develop a sustainable wind sector
Wednesday, June 15, 2022 -
A digital future for the process industries with new Ayrshire technology centre
Thursday, June 9, 2022 -
Key equipment arrives at Boeing R&D facility in Scotland
Wednesday, June 1, 2022 -
Pioneering cross border collaboration provides crucial support to UK forging and forming community
Wednesday, June 1, 2022 -
Wind turbine blade recycling project powers up at the Lightweight Manufacturing Centre
Friday, May 20, 2022 -
NMIS prepares for MACH debut
Thursday, March 31, 2022 -
Two new AFRC Tier Two Members accelerating traditional manufacturing methods into the 21st century
Tuesday, March 8, 2022 -
NMIS HQ update: construction reaches final stages
Friday, March 4, 2022 -
Rotary forge heading to 'steel city' from Renfrewshire
Monday, February 28, 2022 -
New project set to help manufacturers cut costs and land net-zero targets
Wednesday, February 9, 2022 -
Entries now open for showpiece celebration of Scottish innovation
Tuesday, February 8, 2022 -
University of Strathclyde students aim for a podium finish in NMIS motorcycle racing project
Tuesday, March 8, 2022 -
Fifty fully paid work placements made available for STEM graduates in Scotland
Monday, January 31, 2022 -
The future of manufacturing comes to the AFRC with three new Members and one renewal
Wednesday, January 19, 2022 -
The skill requirements for a net zero future: The Manufacturer in conversation
Thursday, January 13, 2022 -
Manufacturing Skills Academy launches pandemic recovery package to help upskill Scots and boost innovation
Wednesday, December 22, 2021 -
Forging a new future for green energy
Tuesday, December 7, 2021 -
From 3D printer to international catwalk
Wednesday, December 8, 2021 -
NMIS operator, Strathclyde, wins Queen’s Anniversary Prize for Higher and Further Education in Advanced Manufacturing
Friday, November 26, 2021 -
£2million pilot led by Scottish researchers to develop UK’s first wind turbine blade recycling project gets go-ahead
Thursday, November 18, 2021 -
£1.2m project extends life of parts in quest to help manufacturers tap into net zero economy
Thursday, November 18, 2021 -
Manufacturing a Net-Zero Future: in-person conference open for registration
Wednesday, October 20, 2021 -
NMIS and Boeing officially open new R&D facility in Renfrewshire
Tuesday, October 5, 2021 -
Manufacturing a net-zero future: a conversation with NMIS Chief Operating Officer Sarah Jardine
Tuesday, September 28, 2021 -
Patients recovering from strokes, dystonia and sports injuries could reduce rehabilitation time by 30% with virtual reality gaming platform
Thursday, September 23, 2021 -
National Manufacturing Institute Scotland HQ reaches major construction milestone
-
Free online events with NMIS and Product Design Scotland: navigating the product design process
Wednesday, September 1, 2021 -
NMIS HQ construction update: digital factory is taking shape
Friday, March 26, 2021 -
New partnership set to future proof process manufacturing in Scotland
Monday, August 30, 2021 -
Smart Factory Innovation Hub testbed at NMIS helping Scottish businesses to harness digital technologies
Thursday, May 6, 2021 -
Recycling aeroplanes and turning them into drinks cans: the role of composites in the journey towards net-zero
Thursday, August 26, 2021 -
World renowned Scottish forging and forming research centre opening an office in ‘steel city’
Thursday, August 12, 2021 -
Tooling specialist chisels out agreement for another three years
Tuesday, August 10, 2021 -
AFRC and MAPAL drive tooling manufacture into the future
Wednesday, May 12, 2021 -
Augmented reality project to help train surgeons around the world on ‘hyper-real’ models of organs
Wednesday, July 21, 2021 -
Every day’s a school day: skills development and its vital role in manufacturing, industry 4.0, and the growth of the Scottish economy
Tuesday, June 15, 2021 -
New capability network will help businesses across Scotland access support and unlock innovation
Thursday, June 10, 2021 -
NMIS HQ construction update: from steel to timber and a heather coloured roof
Monday, May 31, 2021 -
Boeing getting ready for lift off from Westway, Renfrew with NMIS
Wednesday, May 19, 2021 -
New local collaboration gives young people in care a pathway into manufacturing roles
Wednesday, May 12, 2021 -
NMIS launches new scheme to support STEM graduates into employment amid pandemic
Friday, March 19, 2021 -
Three diverse new Tier Two Members join the AFRC
Thursday, March 18, 2021 -
Circular economy project set to ensure clean energy solutions don’t increase landfill waste
-
AFRC welcomes Booth Welsh with iTech
-
AFRC welcomes global technology giant Hewlett Packard Enterprise as Tier Two Member
Wednesday, January 20, 2021 -
Construction underway on flagship National Manufacturing Institute Scotland facility
Tuesday, December 15, 2020 -
NMIS to help transport operators navigate Covid-19 safety measures
Wednesday, December 9, 2020 -
Making Scotland’s future - recovery plan for the manufacturing sector
Friday, December 4, 2020 -
Global companies strengthen their commitment to AFRC to deliver better customer solutions
Tuesday, November 24, 2020 -
Strathclyde and partners to deliver satellite constellation project
Thursday, November 19, 2020 -
Sustainability top of the agenda for NMIS as it joins new additive manufacturing body
Tuesday, October 27, 2020 -
NMIS offers free training resources and a new online CPD course to help individuals upskill from home
Thursday, October 22, 2020 -
High-tech software company Bellrock Technology Ltd joins AFRC as latest Tier Two Member
Monday, October 12, 2020 -
AFRC announces new partnership with Theorem Solutions
Thursday, October 8, 2020 -
Scottish project ‘reinvents the wheel’ with flat-pack hydro-energy solutions for Africa
Monday, October 5, 2020 -
New tool will help Covid response technologies gain necessary approvals
Wednesday, September 23, 2020 -
AFRC welcomes Kigtek as latest Tier 2 member
Friday, September 18, 2020 -
NMIS Boeing programme takes off from Westway, Renfrew
Monday, September 14, 2020 -
AFRC Welcomes ROCOL as new Tier Two Member
Thursday, October 8, 2020 -
University of Strathclyde at the forefront of projects helping small and medium sized manufacturing firms in Scotland
Wednesday, July 29, 2020 -
NMIS donates 10,000 face visors to help charities move forward from lockdown
Wednesday, July 22, 2020 -
Digital cask filling solution could save Scottish whisky industry millions
Tuesday, July 14, 2020 -
Transvalor joins the AFRC as the first Tier One Partner in support of new FutureForge facility
Tuesday, July 7, 2020 -
Made in Scotland: the new wind turbine blade set to make green energy even greener
Wednesday, July 1, 2020 -
Contract awarded for construction of flagship National Manufacturing Institute Scotland facility
Friday, May 29, 2020 -
National Manufacturing Institute Scotland leadership team bolstered with CEO appointment
Tuesday, May 26, 2020 -
Planning permission granted for construction of National Manufacturing Institute Scotland facility
Monday, April 6, 2020 -
Boeing touches down in Scotland with new strategic alliance
Monday, April 6, 2020 -
NMIS Insights: National Manufacturing Institute Scotland launches its first event series
-
Planning permission submitted for National Manufacturing Institute Scotland
-
Why the oil and gas sector needs to embrace Additive Manufacturing
-
AFRC Tier Two Membership is measuring up for leading precision engineering firm
