Fusion 360 CAM- Milling
Course Summary
This one-day training course will instruct engineers in the best usage and approaches for using Fusion 360 for 2 1/2 axis milling.
The following topics will be covered in this course:
- Fusion 360 CAM interface
- Creating a job setup
- Creating & using tools in the library
- Face milling
- Strategies for contouring & pocketing
- 2D strategies for adaptive clearance
- Drilling operations
- Circular, slot & trace machining
- Creating setup sheets
- Simulating & post-processing the job
The learning outcomes for the course are as follows:
- Fusion CAM interface for milling.
- Creating a milling setup.
- Creating tools and using the tool library.
- 2D and 3D toolpath strategies.
- 3+2 milling workflow.
- 4th axis milling strategies.
- Drilling and hole operations.
- Simulation and verification.
- Post-processing.
PC literate engineers who understand engineering and manufacturing principles.
This course is being delivered by Cadspec. The expert team has over ten decades of combined experience working with clients across the whole of the UK industry – from manufacturing and architecture to engineering and construction.
Cadspec take pride in providing both personalised design software solution and the training to unlock its full potential.
Booking fee: £650.
Dates & Venues
Date | 20 & 21 August 2024 |
---|---|
Location | NMIS Netherton |
Duration | 09:30- 17:00 |
Cost | 650 |
In collaboration with